Sprocket Center - 1260 Diavel (all models) 2019-2022
Ducati 1260 Diavel STOCK SIZES:
- Front Sprocket - 15
- Rear Sprocket - 43
- Chain - 112 Links / 525 Pitch
Select a Sub-Category
1260 Diavel (all models) 2019-2022 Featured Products
Easy sprocket changes & lighter than the OEM rear. This 520 quick-change system for the Ducati Diavel 1260 is great replacement for your heavy OEM rear sprocket. Once installed this two-piece sprocket/carrier system allows you to easily remove and replace the rear sprocket without disassembling the rear hub/wheel. Perfect for changing between street and track set-ups. Same system used by many Ducati race teams. For an easy installation, the chain is cut to the proper length based on your sprocket size selections.
Ducati 1260 Diavel Quick-change Kits include:
- (1) Superlite brand chromoly-steel front sprocket
- (1) Superlite RSX steel or RS8R aluminum QC rear sprocket
- (1) Superlite PCD-3 Aluminum Quick Change Sprocket Carrier
- set of sprocket/carrier hardware (Steel or Titanium)
- choice of 520 X'ring chain, cut to length
- (1) matching rivet-type master link
Optional parts shown but are not required. Superlite Quick Change Carriers accepts OEM Ducati parts.
This sprocket must be used with the Superlite "Quick Change" Ducati Sprocket Carriers (#PCD3 or PCD-4). Once installed this two-piece sprocket/carrier system allows you to easily remove and replace your Ducati rear sprocket without disassembling the rear hub/wheel. Sprocket carrier is not included.
- Exclusive tooth profile for extended mileage output
- Induction hardened C45 steel with a black zinc plated finish
- Silver anodized 6061-T6 aluminum CNC machined sprocket carrier
- 520 Pitch Steel QC Sprocket
- Grade 5 Titanium sprocket bolts with locking Grade 8 Fuji flange nuts
- Carrier accepts all Ducati OE parts
- Uses OEM or SuperFlex Cush Drives (not included)
- Optional SuperFLEX Cush Drives can be included at a discount but are not required.* Images are for illustrative purposes only, actual design may differ slightly. Some images contain optional parts.
Same sprockets used by top championship winning Ducati race teams. Superlite RS8R Series aluminum race sprockets are manufactured to be extremely light yet very durable. If you're looking to reduce rotating weight while still maintaining high durability, the RS8-R rear sprocket is for you. Must be used with Superlite PCD-3 or PCD-4 "Quick Change" Sprocket Carrier.
- Exclusive tooth profile for extended mileage output
- Black hard anodized 7075-T6 aluminum
- Rated for 240+ horsepower
- Average weight per sprocket is 9 ounces or less
Superlite Sprockets are used by top championship winning Ducati race teams. The new Superlite RS series TITANIUM race sprockets are manufactured to be extremely light yet very durable. If you're looking to reduce rotating weight while still maintaining durability & longevity. This RS Titanium rear sprocket is for you. Must be used with Superlite PCD-3 or PCD-4 "Quick Change" Sprocket Carrier. Images may show optional parts. This listing is for the sprocket only (does not include carrier or hardware).
- 520 pitch / sizes 39-45
- CNC machined from aerospace Grade 5 Titanium
- Superior wear and corrosion resistance
- Charcoal Grey anodized coating
Superlite brand Quick-Change Sprocket Kit for the Ducati Diavel 1260 models makes future sprocket changes fast and simple. Once installed, this two-piece sprocket/carrier system allows you to remove and replace the rear sprocket without having to disassemble the rear wheel/hub assembly. All components are precision machined and install just like the Ducati factory parts. For easy installation, the chain is cut to the proper length based on your sprocket size selections.
Ducati Diavel 1260 Quick-change Kits include:
- (1) Superlite brand chromoly-steel front sprocket
- (1) Superlite steel or aluminum QC rear sprocket
- (1) Superlite PCD-3 Aluminum Quick Change Sprocket Carrier
- set of sprocket/carrier hardware (Steel or Titanium)
- choice of 525 X'ring chain, cut to length
- (1) matching rivet-type master link
Optional parts shown but are not required. Superlite Quick Change Carriers accept all OEM Ducati parts.
- Silver anodized 6061-T6 aluminum CNC machined sprocket carrier
- 525 Pitch Steel QC Sprocket
- Grade 5 Titanium sprocket bolts with locking Grade 8 Fuji flange nuts
- Carrier accepts all Ducati OE parts
- Uses OEM or SuperFlex Cush Drives (not included)
* Images are for illustrative purposes only, actual design may differ slightly. Some images contain optional parts.
This sprocket must be used with the Superlite "Quick Change" Ducati Sprocket Carriers (#PCD3 or PCD-4). Once installed this two-piece sprocket/carrier system allows you to easily remove and replace your Ducati rear sprocket without disassembling the rear hub/wheel. Sprocket carrier is not included.
- Exclusive tooth profile for extended mileage output
- Induction hardened C45 steel with a black zinc plated finish
Same sprockets used by top championship winning Ducati race teams. Superlite RS8-R Series aluminum race sprockets are manufactured to be extremely light yet very durable. If you're looking to reduce rotating weight while still maintaining high durability, the RS8-R rear sprocket is for you. Must be used with Superlite PCD-3 or PCD-4 "Quick Change" Sprocket Carrier.
- Exclusive tooth profile for extended mileage output
- Black hard anodized 7075-T6 aluminum
- Rated for 240+ horsepower
- Average weight per sprocket is 9 ounces or less
- Fits 525 pitch chains
- Made from case hardened chromoly steel to exact tolerances
- Exclusive tooth profile offers a precise fitment over other brands
- Fits 520 pitch chains
- Made from case hardened chromoly steel to exact tolerances
- Exclusive tooth profile offers a precise fitment over other brands
Fits all 955 V2|998 V4|1098|1103 V4|1198|1199|1200|1299 large hub Ducati models
- 48mm size
- Available in multiple hard anodized and plated finishes
Combine this cover with the SUPERLITE quick-change assembly for a great looking rear set-up thats up to 40% lighter than OEM.
- Made in the USA
- CNC Machined from 6061-T6 aircraft grade alloy
- Anodized or Plated coating for added strength and durability
- Works with OEM and Aftermarket sprockets & Quick Change
- 25% lighter that stock
Easily installed replacement for your heavy Ducati OEM rear sprocket. Once installed (along with a sprocket - sold separately) this two-piece sprocket/carrier system allows you to easily remove and replace the rear sprocket without removing the rear wheel or hub. This same unit has been used for years by many Ducati Factory race teams.
THIS LISTING IS FOR THE CARRIER ONLY (Sprockets Sold Separately).
- Superlite Ducati carriers are 100% CNC machined in the USA
- Anodized coating for added strength and durability
- Cush drive holes feature rear tabs for added security
- Steel sprocket hardware is included (Titanium optional)
- Must be used with Superlite Quick Change sprockets (50803R, 50804R, 51803R, 51804R)
Optional parts shown but are not required. Superlite Quick Change Carriers accept all OEM Ducati parts.
25% less weight than OEM units! Superlite Polyurethane Cush Drives provide smooth power transfer during hard acceleration and improves overall feel. Superlite Polyurethane Cush Drive are made in the USA. This 6 piece set is a direct replacement for the Ducati OEM parts.
- Corrosion resistant Polyurethane material that will never break down or crack
- High strength corrosion resistant Grade 5 Titanium studs
- Includes black steel lock-nuts (Titanium hardware available)