Sprocket Center » Quick-Change Components

Description: Replace your Ducati V4 heavy OEM rear sprocket with this lighter and more flexible 520 pitch set-up. This rear sprocket assembly includes everything you need to convert the Ducati V4 OEM one-piece rear sprocket to a lighter and more functional Quick-Change system. This system is perfect for Ducati riders who likes to have a multiple gearing options for that track day or interstate trip. Each Ducati Pnigle V4 520 Quick-Change assembly includes the following:

• (1) SUPERLITE Billet Quick Change Sprocket Carrier (#PCD-4)
• (1) SUPERLITE QC Rear Sprocket - 520 Pitch (#50804/51804)
• All necessary hardware is included (Steel or Titanium)

Optional parts shown but are not required. Superlite Quick Change Carriers also accept the OEM Ducati parts.

Description: Replace your Ducati V2 heavy OEM rear sprocket with this lighter and more flexible 520 pitch set-up. This rear sprocket assembly includes everything you need to convert the Ducati V2 OEM one-piece rear sprocket to a lighter and more functional Quick-Change system. This system is perfect for Ducati riders who likes to have a multiple gearing options for that track day or interstate trip. Each Ducati V2 Panigale 520 Quick-Change assembly includes the following:

• (1) SUPERLITE Billet Quick Change Sprocket Carrier (#PCD-4)
• (1) SUPERLITE QC Rear Sprocket - 520 Pitch (#50804/51804)
• All necessary hardware is included (Steel or Titanium)

Optional parts shown but are not required. Superlite Quick Change Carriers also accept the OEM Ducati parts.

Description: Same fit as your Ducati OEM sprocket but way more functional! Direct Replacement rear sprocket assembly for Ducati Single Sided Swingarm models. This Quick Change assembly includes everything you need to convert your Ducati's heavy OEM one-piece rear sprocket to a much lighter and more functional set-up. Once installed, you can easily and inexpensively change your rear sprocket without having to disassemble the entire rear hub each time.

- 6061-T6 aluminum CNC machined sprocket carrier # PCD-1
- 525 Pitch Steel QC Sprocket (#50607)
- Steel hardware (optional Titanium)
- Carrier accepts all Ducati OE parts
- Shipped fully assembled, torqued and ready for installation
- Uses OEM or optional SuperFlex Cush Drives (not included)

Description:

This sprocket must be used with the Superlite "Quick Change" Ducati Sprocket Carriers (#PCD1 or PCD-2). Once installed this two-piece sprocket/carrier system allows you to easily remove and replace your Ducati rear sprocket without disassembling the rear hub/wheel. Sprocket carrier is not included.

• Exclusive tooth profile for extended mileage output
• Induction hardened steel with a black zinc plated finish

Description:

Superlite Sprockets are used by top championship winning Ducati race teams. The new Superlite RS series TITANIUM race sprockets are manufactured to be extremely light yet very durable. If you're looking to reduce rotating weight while still maintaining durability & longevity. This RS Titanium rear sprocket is for you. Must be used with Superlite PCD-3 or PCD-4 "Quick Change" Sprocket Carrier. Images may show optional parts. This listing is for the sprocket only (does not include carrier or hardware).

• 520 pitch / sizes 39-45
• CNC machined from aerospace Grade 5 Titanium
• Superior wear and corrosion resistance
• Charcoal Grey anodized coating

Images may show optional parts.

Description:

Same sprockets used by top championship winning Ducati race teams. Superlite RS8R Series aluminum race sprockets are manufactured to be extremely light yet very durable. If you're looking to reduce rotating weight while still maintaining high durability, the RS8-R rear sprocket is for you. Must be used with Superlite PCD-3 or PCD-4 "Quick Change" Sprocket Carrier.

• Exclusive tooth profile for extended mileage output
• Black hard anodized 7075-T6 aluminum
• Rated for 240+ horsepower
• Average weight per sprocket is 9 ounces or less

Description:

This sprocket must be used with the Superlite "Quick Change" Ducati Sprocket Carriers (#PCD3 or PCD-4). Once installed this two-piece sprocket/carrier system allows you to easily remove and replace your Ducati rear sprocket without disassembling the rear hub/wheel. Sprocket carrier is not included.

• Exclusive tooth profile for extended mileage output
• Induction hardened C45 steel with a black zinc plated finish

Description:

Same sprockets used by top championship winning Ducati race teams. Superlite RS8-R Series aluminum race sprockets are manufactured to be extremely light yet very durable. If you're looking to reduce rotating weight while still maintaining high durability, the RS8-R rear sprocket is for you. Must be used with Superlite PCD-3 or PCD-4 "Quick Change" Sprocket Carrier.

• Exclusive tooth profile for extended mileage output
• Black hard anodized 7075-T6 aluminum
• Rated for 240+ horsepower
• Average weight per sprocket is 9 ounces or less

Description: Makes rear sprocket changes quick & easy. Perfect for Track or street. This system is a direct replacement for your MV Augusa OEM rear sprocket. Once installed (along with a sprocket - sold separately) this two-piece sprocket/carrier system allows you to easily remove and replace the rear sprocket without removing the rear wheel or hub. This same unit has been used for years by many Ducati and MV Factory race teams. This can be used with the OEM or aftermarket hub covers and is design to use the OEM or SuperFLEX Cush Drives.
For use with AFAM or SUPERLITE brand Quick-change sprockets. These sprockets are available in Steel or Alloy and are offered in a wide range of sizes. THIS LISTING IS FOR THE CARRIER ONLY (Sprockets Sold Separately) - Made in the USA - CNC Machined from 6061-T6 aircraft grade alloy - Anodized coating for added strength and durability - Cush drive holes feature rear tabs for added security - Black steel sprocket hardware is included - **Optional Titanium Sprocket Studs and Nuts can be included. (40% less weight vs. steel) *Does not include the sprocket. Sprockets Sold Separately (see below)

Description: Makes rear sprocket changes quick & easy. Perfect for Track or street. This system is a direct replacement for your heavy OEM rear sprocket. Once installed (along with a sprocket - sold separately) this two-piece sprocket/carrier system allows you to easily remove and replace the rear sprocket without removing the rear wheel or hub. This same unit has been used for years by many Ducati Factory race teams. This can be used with the OEM or aftermarket hub covers and is design to use the OEM or SuperFLEX Cush Drives.
For use with AFAM or SUPERLITE brand Quick-change sprockets. These sprockets are available in Steel or Alloy and are offered in a wide range of sizes. THIS LISTING IS FOR THE CARRIER ONLY (Sprockets Sold Separately)

- Made in the USA - CNC Machined from 6061-T6 aircraft grade alloy - Anodized coating for added strength and durability - Cush drive holes feature rear tabs for added security - Black steel sprocket hardware is included - **Optional Titanium Sprocket Studs and Nuts can be included. (40% less weight vs. steel)

*Does not include the sprocket. Sprockets Sold Separately (see below)

Description: Makes rear sprocket changes quick & easy. Perfect for Track or street.
This system is a direct replacement for your heavy Ducati OEM rear sprocket. Once installed along with a sprocket (sold separately) this two-piece sprocket/carrier system allows you to easily remove and replace the rear sprocket without removing the rear wheel or hub. This same unit has been used for years by many Ducati Factory race teams. This can be used with the OEM or aftermarket hub covers.

For use with AFAM or SUPERLITE brand Quick-change sprockets. These sprockets are available in Steel or Alloy and are offered in a wide range of sizes.
THIS LISTING IS FOR THE CARRIER ONLY (Sprockets Sold Separately , see below)

- Made in the USA
- CNC Machined from 6061-T6 aircraft grade alloy
- Anodized coating for added strength and durability
- Cush drive holes feature rear tabs for added security
- Black steel sprocket hardware is included

Description: Makes rear sprocket changes quick & easy. Perfect for Track or street.
Easily installed replacement for your heavy Ducati OEM rear sprocket. Once installed (along with a sprocket - sold separately) this two-piece sprocket/carrier system allows you to easily remove and replace the rear sprocket without removing the rear wheel or hub. This same unit has been used for years by many Ducati Factory race teams.

THIS LISTING IS FOR THE CARRIER ONLY (Sprockets Sold Separately).

- Superlite Ducati carriers are 100% CNC machined in the USA
- Anodized coating for added strength and durability
- Cush drive holes feature rear tabs for added security
- Steel sprocket hardware is included (Titanium optional)
- Must be used with Superlite Quick Change sprockets (50803R, 50804R, 51803R, 51804R)

Optional parts shown but are not required. Superlite Quick Change Carriers accept all OEM Ducati parts.